Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.
Diallel mating designs are often used by plant breeders to compare the possible crosses between a set of genotypes. In spite of such widespread usage, the process of data analysis in R is not yet strightforward and it is not clear which tool should be routinely used. We recently gave a small contribution by publishing a paper in Plant Breeding (Onofri et al., 2020 ), where we advocated the idea that models for diallel crosses are just a class of general linear models, that should be fit by Ordinary Least Squares (OLS) or REstricted Maximum Likelihood methods (REML).
In that paper, we presented lmDiallel, a new R package to fit diallel models, which we followed up with a series of three blog posts, giving more detail about the package (see here), about the Hayman’s models type 1 (see here) and type 2 (see here). These latter models can be used to describe the data from full diallel experiments.
In this fourth post we are going to talk about a very flexible family of models, that was introduced by Griffing in 1956 and it is still very used in plant breeding, to estimate General Combining Ability (GCA) and Specific Combining Ability (SCAs). The equations take different forms, to account for all possible mating schemes.
With full diallel experiments (including selfs and reciprocals; mating scheme 1), the model is very similar to Hayman’s model type 1, except that reciprocal effects are not parted into RGCA and RSCA (Reciprocal General Combining Ability and Reciprocal Specific Combining Ability). The equation is:
\[y _{ijk} = \mu + \textrm{g}_i + \textrm{g}_j + \textrm{ts}_{ij} + r_{ij} + \varepsilon_{ijk} \quad\quad\quad (1)\]
where \(\mu\) is the expected value (the overall mean, in the balanced case) and \(\varepsilon_{ijk}\) is the residual random error term for the observation in the \(k^{th}\) block and with the parentals \(i\) and \(j\). All the other terms correspond to genetic effects, namely:
- the \(\textrm{g}_i\) and \(\textrm{g}_j\) terms are the General Combining Abilities (GCAs) of the \(i^{th}\) and \(j^{th}\) parents.
- The \(ts_{ij}\) term is the total Specific Combining Ability (SCA) for the combination \(ij\).
- The \(r_{ij}\) term is the reciprocal effect for a specific \(ij\) combination.
When the reciprocal crosses are not available (mating scheme 2), the term \(\textrm{r}_{ij}\) needs to be dropped, so that the model reduces to:
\[y _{ijk} = \mu + \textrm{g}_i + \textrm{g}_j + \textrm{ts}_{ij} + \varepsilon_{ijk} \quad\quad\quad (2)\]
When the reciprocals are available, but selfs are missing (mating scheme 3), the model is similar to equation 1, but the term \(\textrm{ts}_{ij}\) is replaced by \(\textrm{s}_{ij}\) (we use a different symbol, because the design matrix is slightly different and needs a different coding):
\[y _{ijk} = \mu + \textrm{g}_i + \textrm{g}_j + \textrm{s}_{ij} + r_{ij} + \varepsilon_{ijk} \quad\quad\quad (3)\]
Finally, when neither selfs nor reciprocals are available (mating scheme 4), the equation reduces to:
\[y _{ijk} = \mu + \textrm{g}_i + \textrm{g}_j + \textrm{s}_{ij} + \varepsilon_{ijk} \quad\quad\quad (4)\]
Let’s see how to fit the above models by using a set of examples with different mating schemes.
Example 1: a full diallel experiment
The example in Hayman (1954) relates to a complete diallel experiment with eight parental lines, producing 64 combinations (8 selfs + 28 crosses with 2 reciprocals each). The R dataset is included in the ‘lmDiallel’ package; in the box below we load the data, after installing (if necessary) and loading the ‘lmDiallel’ package (see box below). For brevity, some R commands are shown but not executed (they are commented out)
# library(devtools) # Install if necessary
# install_github("OnofriAndreaPG/lmDiallel")
library(lmDiallel)
data("hayman54")
For this complete diallel experiment we can fit equation 1, by including GCAs, tSCAs and reciprocal effects. Please, note that excluding any of these effects results in unreliable estimates of the residual mean square. We can use either the lm() or the lm.diallel() functions, as shown in the box below.
contrasts(hayman54$Block) <- "contr.sum"
dMod <- lm(Ftime ~ Block + GCA(Par1, Par2) + tSCA(Par1, Par2) +
REC(Par1, Par2), data = hayman54)
dMod2 <- lm.diallel(Ftime ~ Par1 + Par2, Block = Block,
data = hayman54, fct = "GRIFFING1")
# summary(dMod2)
anova(dMod2)
## Analysis of Variance Table
##
## Response: Ftime
## Df Sum Sq Mean Sq F value Pr(>F)
## Block 1 142 142 0.3416 0.56100
## GCA 7 277717 39674 95.1805 < 2.2e-16 ***
## SCA 28 102238 3651 8.7599 6.656e-13 ***
## Reciprocals 28 19112 683 1.6375 0.05369 .
## Residuals 63 26260
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
In order to obtain the full list of genetical parameters, we can use the glht() function in the multcomp package, together with the diallel.eff() function in the ‘lmDiallel’ package. An excerpt of the results is shown below.
library(multcomp) gh <- glht(linfct = diallel.eff(dMod2)) # summary(gh, test = adjusted(type = "none")) # Simultaneous Tests for General Linear Hypotheses # # Linear Hypotheses: # Estimate Std. Error t value Pr(>|t|) # Intercept == 0 1.629e+02 1.805e+00 90.270 < 2e-16 *** # g_A == 0 4.620e+01 3.376e+00 13.683 2.17e-13 *** # g_B == 0 -2.459e+01 3.376e+00 -7.282 9.83e-08 *** # g_C == 0 4.963e+01 3.376e+00 14.702 4.13e-14 *** # g_D == 0 1.835e+01 3.376e+00 5.436 1.07e-05 *** # g_E == 0 -2.093e+01 3.376e+00 -6.199 1.47e-06 *** # g_F == 0 2.445e+00 3.376e+00 0.724 0.475340 # g_G == 0 -4.471e+01 3.376e+00 -13.244 4.57e-13 *** # g_H == 0 -2.640e+01 3.376e+00 -7.819 2.71e-08 *** # ts_A:A == 0 3.371e+01 1.263e+01 2.669 0.012941 * # ts_A:B == 0 -3.151e+01 9.023e+00 -3.492 0.001731 ** # ... # ...
Example 2: no reciprocals
As an example of a diallel experiments with no reciprocals, we consider the data reported in Lonnquist and Gardner (1961) relating to the yield of 21 maize genotypes, obtained from six male and six female parentals. The dataset is available as lonnquist61 in the lmDiallel package and the model fitting process is very similar to that shown before for the mating scheme 1, apart from the fact that we fit equation 2 instead of equation 1. In the ‘lm()’ call, we use the GCA() and tSCA() functions, while in the lm.diallel() call, we set the argument ‘fct’ to “GRIFFING2”.
rm(list=ls())
data(lonnquist61)
dMod <- lm(Yield ~ GCA(Par1, Par2) + tSCA(Par1, Par2),
data = lonnquist61)
dMod2 <- lm.diallel(Yield ~ Par1 + Par2,
data = lonnquist61, fct = "GRIFFING2")
In this case the dataset has no replicates and, for the inferences, we need to provide an estimate of the residual mean square and degrees of freedom (see box below). If we have fitted the model by using the lm() function, the resulting ‘lm’ object can be explored by using the summary.diallel() and anova.diallel() functions. Otherwise, if we have fitted the model with the lm.diallel() function, the resulting ‘diallel’ object can be explored by using the summary() and anova() methods. See the box below for an example: the results are, obviously, the same.
# summary.diallel(dMod, MSE = 7.1, dfr = 60) anova.diallel(dMod, MSE = 7.1, dfr = 60) ## Analysis of Variance Table ## ## Response: Yield ## Df Sum Sq Mean Sq F value Pr(>F) ## GCA(Par1, Par2) 5 234.23 46.846 6.5980 5.923e-05 *** ## tSCA(Par1, Par2) 15 238.94 15.929 2.2436 0.01411 * ## Residuals 60 7.100 ## --- ## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1 # summary(dMod2, MSE = 7.1, dfr = 60) anova(dMod2, MSE = 7.1, dfr = 60) ## Analysis of Variance Table ## ## Response: Yield ## Df Sum Sq Mean Sq F value Pr(>F) ## GCA 5 234.23 46.846 6.5980 5.923e-05 *** ## SCA 15 238.94 15.929 2.2436 0.01411 * ## Residuals 60 7.100 ## --- ## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
Also for the diallel object, we can retrieve the full list of genetical parameters with the glht() function, by using the same syntax as shown above.
gh <- glht(linfct = diallel.eff(dMod2, MSE = 7.1, dfr = 60)) # summary(gh, test = adjusted(type = "none"))
Example 3: no selfs
When the experimental design includes the reciprocal crosses but not the selfs, we can fit Equation 3. As an example, we take the same dataset as before (‘hayman54’), but we remove the selfs by using ‘dplyr’. The fitting process is the same as shown above and only the model specification is changed.
library(dplyr)
data(hayman54)
hayman54b <- hayman54 %>%
filter(Par1 != Par2)
dMod <- lm(Ftime ~ Block + GCA(Par1, Par2) +
SCA.G3(Par1, Par2) + REC.G3(Par1, Par2),
data = hayman54b)
dMod2 <- lm.diallel(Ftime ~ Par1 + Par2, Block = Block,
data = hayman54b, fct = "GRIFFING3")
anova(dMod2)
## Analysis of Variance Table
##
## Response: Ftime
## Df Sum Sq Mean Sq F value Pr(>F)
## Block 1 329 329.1 0.8367 0.36432
## GCA 7 168923 24131.9 61.3479 < 2.2e-16 ***
## SCA 20 37289 1864.4 4.7398 2.318e-06 ***
## Reciprocals 28 19112 682.6 1.7352 0.04052 *
## Residuals 55 21635
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
gh <- glht(linfct = diallel.eff(dMod2))
# summary(gh, test = adjusted(type = "none"))
Example 4: no reciprocals, no selfs
In this final example, we consider a mating scheme where neither the reciprocal crosses nor the selfs are included (mating scheme 4). The dataset is taken from the original Griffing’s paper (Griffing, 1956) and it is available as ‘Griffing56’ in the ‘lmDiallel’ package. The analysis proceeds in the very same fashion as above, apart from the fact that we fit Equation 4, instead of 3 and that we input the appropriate residual error term to obtain the correct inferences, as the original dataset does not contain the replicated data.
data("griffing56")
dMod <- lm(Yield ~ GCA(Par1, Par2) + SCA.G3(Par1, Par2),
data = griffing56)
anova.diallel(dMod, MSE = 21.05, dfr = 2558)
## Analysis of Variance Table
##
## Response: Yield
## Df Sum Sq Mean Sq F value Pr(>F)
## GCA(Par1, Par2) 8 18606.0 2325.75 110.487 < 2.2e-16 ***
## SCA.G3(Par1, Par2) 27 9164.9 339.44 16.125 < 2.2e-16 ***
## Residuals 2558 21.05
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
dMod2 <- lm.diallel(Yield ~ Par1 + Par2,
data = griffing56, fct = "GRIFFING4")
anova(dMod2, MSE = 21.05, dfr = 2558)
## Analysis of Variance Table
##
## Response: Yield
## Df Sum Sq Mean Sq F value Pr(>F)
## GCA 8 18606.0 2325.75 110.487 < 2.2e-16 ***
## SCA 27 9164.9 339.44 16.125 < 2.2e-16 ***
## Residuals 2558 21.05
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
# summary(dMod2, MSE = 21.05, dfr = 2558)
gh <- glht(linfct = diallel.eff(dMod2, MSE = 21.05, dfr = 2558))
# summary(gh, test = adjusted(type = "none"))
Estimation of variance components (random genetic effects)
If we intend to regard the genetic effects as random and to estimate variance components, we can use the mmer() function in the ‘sommer’ package (Covarrubias-Pazaran, 2016), although we need to code a bunch of dummy variables. In order to make things simpler for routine experiments, we have coded the mmer.diallel() wrapper using the same syntax as the lm.diallel() function. The exemplary code is given in the box below, relating to Equation 2, although the other equations can be fitted in a similar manner.
# Random genetic effects
mod1m <- mmer.diallel(Yield ~ Par1 + Par2,
data = lonnquist61,
fct = "GRIFFING2")
mod1m
## VarComp VarCompSE
## GCA 3.863695 3.769373
## tSCA 15.930144 5.819217
In the next post we will consider another important family of models, devised by Gardner and Eberarth in 1966, which accounts for heterotic effects. Please, stay tuned!
Thanks for reading
Prof. Andrea Onofri
Dr. Niccolò Terzaroli
Prof. Gino Russi
Department of Agricultural, Food and Environmental Sciences
University of Perugia (Italy)
andrea.onofri@unipg.it
References
- Covarrubias-Pazaran, G., 2016. Genome-Assisted Prediction of Quantitative Traits Using the R Package sommer. PLOS ONE 11, e0156744.
- Griffing, B., 1956. Concept of general and specific combining ability in relation to diallel crossing systems. Australian Journal of Biological Science 9, 463–493.
- Möhring, J., Melchinger, A.E., Piepho, H.P., 2011b. REML-Based Diallel Analysis. Crop Science 51, 470–478. https://doi.org/10.2135/cropsci2010.05.0272
- Onofri, A., Terzaroli, N., Russi, L., 2020. Linear models for diallel crosses: a review with R functions. Theor Appl Genet. https://doi.org/10.1007/s00122-020-03716-8
R-bloggers.com offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.