How to install R and RStudio?
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.
What is R and RStudio?
R
The statistical program R is nothing more than a programming language, mainly used for data manipulation and to perform statistical analyses. At the time of writing, this language is (one of) the leading program in statistics, although not the only programming language used by statisticians.
In order to use R, we need two things:
- a text editor in which to write our code
- a place to run this code
You can download R at https://cran.r-project.org/mirrors.html. Select the CRAN mirror site closest to you, then in the box labeled “Download and Install R”, click the link corresponding to your operating system.
RStudio
This is where RStudio comes handy. RStudio is an integrated development environment (IDE) for R. R and RStudio work together. R is a program that runs all your code, and RStudio is another program that allows you to control R in a more comfortable and friendly way. RStudio has the advantage of offering both a powerful text editor for writing your code and a place to run the code written in this editor. For these reasons, I highly recommend using RStudio instead of R. (Note that RStudio requires the prior installation of the R software provided by CRAN in order to be able to function properly. Just installing RStudio on your personal computer is not enough.)
You can download RStudio at www.rstudio.com.
The main components of RStudio
Now that both programs are installed on your computer, let’s dive into the main components of RStudio.
By default, the RStudio window has three panes:
- The console (red pane)
- The environment (green pane)
- Files, plots, help, etc. (blue pane)
RStudio window
The console (red pane) is where you can execute your code (more information on the red and blue panes later). By default, the text editor does not open automatically. To open it, click on File > New File > R Script or click on the button representing a white sheet marked with a small green cross in the upper left corner, then on R Script:
New R script in RStudio
A new pane (in orange below), also known as the text editor, opens in which you will be able to write your code. The code will be executed and the results displayed in the console (red pane).
Write and execute your code in RStudio
Note that you can also write code in the console (red pane). However, I strongly recommend writing your code in the text editor (orange pane) because you can save the code written in the text editor (and thus execute it again later), while you cannot save the code written in the console.
To execute code written in the text editor (orange pane), you have two options:
- Type your code and then press the “Run” button (see below) or use the keyboard shortcut CTRL + Enter (cmd + Enter on Mac). Only the chunk of code where your cursor is located will then be executed.
- Type your code and select in the text editor the part you want to execute and then press the “Run” button or use the keyboard shortcut CTRL + Enter (cmd + Enter on Mac). All the selected code will be executed
Run code in RStudio
For example, try typing 1+1 in the text editor and execute it by clicking on “Run” (or CTRL/cmd + Enter). You should see the result 2 in the console, as shown in the screenshot below:
Example of code executed in RStudio
The text editor and the console are the panes you will use most often. The two other panes (the blue and green panes introduced earlier) will however still be very useful when using RStudio.
The environment (green pane) displays all values stored by RStudio. For example, if you type and execute the code a = 1, RStudio will store the value 1 for a, as shown in the screenshot below:
Environment pane in RStudio
This means that you can now perform any computations with a, such that if you execute a + 1, RStudio will render 2 in the console. In this pane you can also see a tab with a history of the code executed and a button to import a dataset (more on importing a dataset in RStudio).
The last pane (blue) is where you will find everything else such as your files, the plots, the packages, the help documentation, etc. I discuss about the Files tab in more detail here so let’s discuss about the other tabs:
- Plot: where you will see the rendered plots. For instance, run
plot(1:10)and you should see it in this tab. If you plotted more than one plots, you can navigate between them by clicking on the arrows. You can open the plot in a new window by clicking on Zoom and export your plot by clicking on Export. Those buttons are located just under the Plot tab (see figure below) - Packages: where you see all your installed packages. Only fundamental functionalities come with R. Everything else must be installed from packages. Remind that R is open source; everyone can write code and publish it as a package. You are then able to use this package (and all functions built inside this package) for free. Some packages are installed by default, all others must be installed by running
install.packages("name of the package")(do not forget""around the name of the package!). Once the package is installed, you must load the package and only after it has been loaded you can use all the functions it contains. To load a package, runlibrary(name of the package)(this time""around the name of the package are optional, but can still be used if you wish). You also have the possibility to install and load packages via the buttons under the Packages tab. For this, click on the button Install under Packages, type the name of the package you want to install and then click on Install. You will see that the code appears in the console. To load the package, find the package you want to load in the Packages window (you can use the search box), then click on the checkbox next to the name of the package. Again, the code is run in the console. See the figures below if needed. Note that you will need to install packages only once,1 but load packages each time you open RStudio. Furthermore, note that an internet connection is required to install a package, while it is not required to load a package - Help: documentation about all functions written for R. To access the help of a function, run
help("name of the function")or simply?name of the function. For example, to see the help about the mean function, run?mean. You can also press F1 while having your cursor on a function
Plot buttons in RStudio
Step 1: click on the Install button
Step 2: type the name of the package and click on Install
Step 3: load your package by clicking on the box next to the package’s name
Examples of code
Now that you have installed R and RStudio and you know its main components, below are some examples of basic code. More advanced code and analyses are presented in other articles about R.
Calculator
Compute \(5*5\)
5 * 5 ## [1] 25
Compute \(\frac{1}{\sqrt{50\pi}}\, e^{-\frac{(10 – 11)^2}{50}}\)
1 / sqrt(50 * pi) * exp(-(10 - 11)^2 / 50) ## [1] 0.07820854
As you can see, some values like \(\pi\) are stored by default so you do not need to specify its value. Note that RStudio is case sensitive, but not space sensitive. This means that pi is different than Pi but 5*5 gives the same result than 5 * 5.
Store and print values
Note that in order to store a value inside an object, using = or <- is equivalent. I however recommend using <- to follow the guidelines of R programming. You can name your objects (A and B in our case) as you like. However, it is recommended to use short and concise names (as you will most likely type them several times) and avoid special characters.
A <- 5 B <- 6
When storing values, RStudio does not display it on the console. To store a value AND print it in the console, use:
(A <- 5) ## [1] 5
or:
A <- 5 A ## [1] 5
Vectors
It is also possible to store more than one value inside an object via the function c() (c stands for combine).
A <- c(1 / 2, -1, 0) A ## [1] 0.5 -1.0 0.0
Matrices
Or create a matrix via matrix():
my_mat <- matrix(c(-1, 2, 0, 3), ncol = 2, nrow = 2) my_mat ## [,1] [,2] ## [1,] -1 0 ## [2,] 2 3
You can access the help of this function via ?matrix or help("matrix"). Note that inside a function, you can have multiple arguments separated by a comma. Inside matrix(), the first argument is the vector c(-1, 2, 0, 3), the second is ncol = 2 and the third is nrow = 2. For all functions in RStudio, you can specify an argument by its order inside the function or by the name of the argument. If you specify the name of the argument, the order does not matter anymore, so matrix(c(-1, 2, 0, 3), ncol = 2, nrow = 2) is equivalent to matrix(c(-1, 2, 0, 3), nrow = 2, ncol = 2):
my_mat2 <- matrix(c(-1, 2, 0, 3), nrow = 2, ncol = 2) my_mat2 ## [,1] [,2] ## [1,] -1 0 ## [2,] 2 3 my_mat == my_mat2 # is my_mat equal to my_mat2? ## [,1] [,2] ## [1,] TRUE TRUE ## [2,] TRUE TRUE
Generate random values
To generate 10 values based on a normal distribution with mean \(\mu = 400\) and standard deviation \(\sigma = 10\):
my_vec <- rnorm(10, mean = 400, sd = 10) # Display only the first 5 values: head(my_vec, 5) ## [1] 410.0248 386.8963 398.0069 391.9353 390.7513 # Display only the last 5 values: tail(my_vec, 5) ## [1] 406.7265 406.2668 411.6650 378.5354 394.4368
You will have different values than mines due to the fact that they are randomly generated. If you want to make sure to have always the same random values, use set.seed() (with any numeric inside the brackets). For instance, with the following code, you should have the exact same values, no matter where and when you run it:
set.seed(42) rnorm(3, mean = 10, sd = 2) ## [1] 12.741917 8.870604 10.726257
Plot
plot(my_vec, type = "l", # "l" stands for line main = "Plot title", ylab = "Y-axis label", xlab = "X-axis label" )
This is only a very limited introduction to the possibilities of RStudio. If you want to learn more, I recommend that you read other articles related to R, starting with how to import an Excel file or how to manipulate a dataset.
Thanks for reading. I hope this article helped you to install R and RStudio.
As always, if you have a question or a suggestion related to the topic covered in this article, please add it as a comment so other readers can benefit from the discussion.
Actually you will need to reinstall your packages for each new R update. However, if you work on the same R version, you need to install your packages only once but load them everytime you open RStudio.↩︎
R-bloggers.com offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.
Comments
To add comments in your code, use
#before the code: