Microeconomic Theory and Linear Regression (Part 1)
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.
Introduction
Last week I found a lot of materials I used as teaching assistant.
Among those materials I found some class notes from Arne Henningsen, the author of micEcon R package.
I’ll use that package and some others to show some concepts from Microeconomic Theory.
Packages installation:
#install.packages(c("micEcon","lmtest","bbmle","miscTools"))
library(micEcon)
library(lmtest)
library(stats4) #this is a base package so I don't install this
library(bbmle)
library(miscTools)
From package’s help: “The appleProdFr86 data frame includes cross-sectional production data of 140 French apple producers from the year 1986. These data have been extracted from a panel data set that was used in Ivaldi et al. (1996).”
This data frame contains the following columns:
| Variable | Description |
|---|---|
| vCap | costs of capital (including land) |
| vLab | costs of labour (including remuneration of unpaid family labour) |
| vMat | costs of intermediate materials (e.g. seedlings, fertilizer, pesticides, fuel) |
| qApples | quantity index of produced apples |
| qOtherOut | quantity index of all other outputs |
| qOut | quantity index of all outputs (not in the original data set, calculated as \(580,000 \times (qApples + qOtherOut)\)) |
| pCap | price index of capital goods |
| pLab | price index of labour |
| pMat | price index of materials |
| pOut | price index of the aggregate output (not in the original data set, artificially generated) |
| adv | dummy variable indicating the use of an advisory service (not in the original data set, artificially generated) |
Now I’ll examine appleProdFr86 dataset:
data("appleProdFr86", package = "micEcon")
data = appleProdFr86
rm(appleProdFr86)
str(data)
'data.frame': 140 obs. of 11 variables:
$ vCap : int 219183 130572 81301 34007 38702 122400 89061 92134 65779 94047 ...
$ vLab : int 323991 187956 134147 105794 83717 523842 168140 204859 180598 142240 ...
$ vMat : int 303155 262017 90592 59833 104159 577468 343768 126547 190622 82357 ...
$ qApples : num 1.392 0.864 3.317 0.438 1.831 ...
$ qOtherOut: num 0.977 1.072 0.405 0.436 0.015 ...
$ qOut : num 1374064 1122979 2158518 507389 1070816 ...
$ pCap : num 2.608 3.292 2.194 1.602 0.866 ...
$ pLab : num 0.9 0.753 0.956 1.268 0.938 ...
$ pMat : num 8.89 6.42 3.74 3.17 7.22 ...
$ pOut : num 0.66 0.716 0.937 0.597 0.825 ...
$ adv : num 0 0 1 1 1 1 1 0 0 0 ...
Linear Production Function
A linear production function is of the form:
And from that I’ll estimate the function coefficients and a prediction of the output.
The dataset does not provide units of capital, labour or materials, but it provides information about costs and price index. Then I create the variables for the units from that:
data$qCap = data$vCap/data$pCap data$qLab = data$vLab/data$pLab data$qMat = data$vMat/data$pMat
Let \(\rho\) be the linear correlation coefficient. The hypothesis testing of Linear Correlation Between Variables is:
To test this I’ll use the statistic:
that follows a t-Student distribution with \(n-2\) degrees of freedom.
And the correlation test for each input is:
cor.test(data$qOut, data$qCap, alternative="greater")
Pearson's product-moment correlation
data: data$qOut and data$qCap
t = 8.7546, df = 138, p-value = 3.248e-15
alternative hypothesis: true correlation is greater than 0
95 percent confidence interval:
0.4996247 1.0000000
sample estimates:
cor
0.5975547
cor.test(data$qOut, data$qLab, alternative="greater")
Pearson's product-moment correlation
data: data$qOut and data$qLab
t = 20.203, df = 138, p-value < 2.2e-16
alternative hypothesis: true correlation is greater than 0
95 percent confidence interval:
0.8243685 1.0000000
sample estimates:
cor
0.8644853
cor.test(data$qOut, data$qMat, alternative="greater")
Pearson's product-moment correlation
data: data$qOut and data$qMat
t = 15.792, df = 138, p-value < 2.2e-16
alternative hypothesis: true correlation is greater than 0
95 percent confidence interval:
0.7463428 1.0000000
sample estimates:
cor
0.8023509
With the units of input I write the production function and estimate its coefficients:
prodLin = lm(qOut ~ qCap + qLab + qMat, data = data)
data$qOutLin = fitted(prodLin)
summary(prodLin)
Call:
lm(formula = qOut ~ qCap + qLab + qMat, data = data)
Residuals:
Min 1Q Median 3Q Max
-3888955 -773002 86119 769073 7091521
Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept) -1.616e+06 2.318e+05 -6.972 1.23e-10 ***
qCap 1.788e+00 1.995e+00 0.896 0.372
qLab 1.183e+01 1.272e+00 9.300 3.15e-16 ***
qMat 4.667e+01 1.123e+01 4.154 5.74e-05 ***
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
Residual standard error: 1541000 on 136 degrees of freedom
Multiple R-squared: 0.7868, Adjusted R-squared: 0.7821
F-statistic: 167.3 on 3 and 136 DF, p-value: < 2.2e-16
I can also use Log-Likelihood to obtain the estimates:
LogLikelihood = function(beta0, betacap, betalab, betamat, mu, sigma) {
R = data$qOut - (beta0 + betacap*data$qCap + betalab*data$qLab + betamat*data$qMat)
R = suppressWarnings(dnorm(R, mu, sigma, log = TRUE))
-sum(R)
}
prodLin2 = mle2(LogLikelihood, start = list(beta0 = 0, betacap = 10, betalab = 20, betamat = 30,
mu = 0, sigma=1), control = list(maxit= 10000))
summary(prodLin)
Call:
lm(formula = qOut ~ qCap + qLab + qMat, data = data)
Residuals:
Min 1Q Median 3Q Max
-3888955 -773002 86119 769073 7091521
Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept) -1.616e+06 2.318e+05 -6.972 1.23e-10 ***
qCap 1.788e+00 1.995e+00 0.896 0.372
qLab 1.183e+01 1.272e+00 9.300 3.15e-16 ***
qMat 4.667e+01 1.123e+01 4.154 5.74e-05 ***
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
Residual standard error: 1541000 on 136 degrees of freedom
Multiple R-squared: 0.7868, Adjusted R-squared: 0.7821
F-statistic: 167.3 on 3 and 136 DF, p-value: < 2.2e-16
Quadratic Production Function
A quadratic production function is of the form:
And from that I'll estimate the function coefficients and a prediction of the output.
With the arrangements made for the linear case now I have it ready to obtain the coefficients and the predicted output:
prodQuad = lm(qOut ~ qCap + qLab + qMat + I(0.5*qCap^2) + I(0.5*qLab^2) + I(0.5*qMat^2)
+ I(qCap*qLab) + I(qCap*qMat) + I(qLab*qMat), data = data)
data$qOutQuad = fitted(prodQuad)
summary(prodQuad)
Call:
lm(formula = qOut ~ qCap + qLab + qMat + I(0.5 * qCap^2) + I(0.5 *
qLab^2) + I(0.5 * qMat^2) + I(qCap * qLab) + I(qCap * qMat) +
I(qLab * qMat), data = data)
Residuals:
Min 1Q Median 3Q Max
-3928802 -695518 -186123 545509 4474143
Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept) -2.911e+05 3.615e+05 -0.805 0.422072
qCap 5.270e+00 4.403e+00 1.197 0.233532
qLab 6.077e+00 3.185e+00 1.908 0.058581 .
qMat 1.430e+01 2.406e+01 0.595 0.553168
I(0.5 * qCap^2) 5.032e-05 3.699e-05 1.360 0.176039
I(0.5 * qLab^2) -3.084e-05 2.081e-05 -1.482 0.140671
I(0.5 * qMat^2) -1.896e-03 8.951e-04 -2.118 0.036106 *
I(qCap * qLab) -3.097e-05 1.498e-05 -2.067 0.040763 *
I(qCap * qMat) -4.160e-05 1.474e-04 -0.282 0.778206
I(qLab * qMat) 4.011e-04 1.112e-04 3.608 0.000439 ***
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
Residual standard error: 1344000 on 130 degrees of freedom
Multiple R-squared: 0.8449, Adjusted R-squared: 0.8342
F-statistic: 78.68 on 9 and 130 DF, p-value: < 2.2e-16
Linear Specification vs Quadratic Specification
From the above, which of the models is better? Wald Test, Likelihood Ratio Test and ANOVA can help. In this case I'm working with nested models, because the Linear Specification is contained within the Quadratic Specification:
waldtest(prodLin, prodQuad)
Wald test
Model 1: qOut ~ qCap + qLab + qMat
Model 2: qOut ~ qCap + qLab + qMat + I(0.5 * qCap^2) + I(0.5 * qLab^2) +
I(0.5 * qMat^2) + I(qCap * qLab) + I(qCap * qMat) + I(qLab *
qMat)
Res.Df Df F Pr(>F)
1 136
2 130 6 8.1133 1.869e-07 ***
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
lrtest(prodLin, prodQuad)
Likelihood ratio test
Model 1: qOut ~ qCap + qLab + qMat
Model 2: qOut ~ qCap + qLab + qMat + I(0.5 * qCap^2) + I(0.5 * qLab^2) +
I(0.5 * qMat^2) + I(qCap * qLab) + I(qCap * qMat) + I(qLab *
qMat)
#Df LogLik Df Chisq Pr(>Chisq)
1 5 -2191.3
2 11 -2169.1 6 44.529 5.806e-08 ***
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
anova(prodLin, prodQuad, test = "F")
Analysis of Variance Table
Model 1: qOut ~ qCap + qLab + qMat
Model 2: qOut ~ qCap + qLab + qMat + I(0.5 * qCap^2) + I(0.5 * qLab^2) +
I(0.5 * qMat^2) + I(qCap * qLab) + I(qCap * qMat) + I(qLab *
qMat)
Res.Df RSS Df Sum of Sq F Pr(>F)
1 136 3.2285e+14
2 130 2.3489e+14 6 8.7957e+13 8.1133 1.869e-07 ***
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
From the results the Quadratic Specification should be preferred as the tests show that the additional variables do add information.
Cobb-Douglas Production Function
A Cobb-Douglas production function is of the form:
And from that I'll estimate the function coefficients and a prediction of the output.
This function is not linear, so I need to convert the function before fitting:
With the arrangements made for the linear case now I have it ready to obtain the coefficients and the predicted output:
prodCD = lm(log(qOut) ~ log(qCap) + log(qLab) + log(qMat), data = data)
data$qOutCD = fitted(prodCD)
summary(prodCD)
Call:
lm(formula = log(qOut) ~ log(qCap) + log(qLab) + log(qMat), data = data)
Residuals:
Min 1Q Median 3Q Max
-1.67239 -0.28024 0.00667 0.47834 1.30115
Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept) -2.06377 1.31259 -1.572 0.1182
log(qCap) 0.16303 0.08721 1.869 0.0637 .
log(qLab) 0.67622 0.15430 4.383 2.33e-05 ***
log(qMat) 0.62720 0.12587 4.983 1.87e-06 ***
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
Residual standard error: 0.656 on 136 degrees of freedom
Multiple R-squared: 0.5943, Adjusted R-squared: 0.5854
F-statistic: 66.41 on 3 and 136 DF, p-value: < 2.2e-16
Translog Production Function
A Translog production function is of the form:
And from that I'll estimate the function coefficients and a prediction of the output.
With the arrangements made for the linear case now I have it ready to obtain the coefficients and the predicted output:
prodTL = lm(log(qOut) ~ log(qCap) + log(qLab) + log(qMat) + I(0.5*log(qCap)^2)
+ I(0.5*log(qLab)^2) + I(0.5*log(qMat)^2) + I(log(qCap)*log(qLab))
+ I(log(qCap)*log(qMat)) + I(log(qLab)*log(qMat)), data = data)
data$qOutTL = fitted(prodTL)
summary(prodTL)
Call:
lm(formula = log(qOut) ~ log(qCap) + log(qLab) + log(qMat) +
I(0.5 * log(qCap)^2) + I(0.5 * log(qLab)^2) + I(0.5 * log(qMat)^2) +
I(log(qCap) * log(qLab)) + I(log(qCap) * log(qMat)) + I(log(qLab) *
log(qMat)), data = data)
Residuals:
Min 1Q Median 3Q Max
-1.68015 -0.36688 0.05389 0.44125 1.26560
Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept) -4.14581 21.35945 -0.194 0.8464
log(qCap) -2.30683 2.28829 -1.008 0.3153
log(qLab) 1.99328 4.56624 0.437 0.6632
log(qMat) 2.23170 3.76334 0.593 0.5542
I(0.5 * log(qCap)^2) -0.02573 0.20834 -0.124 0.9019
I(0.5 * log(qLab)^2) -1.16364 0.67943 -1.713 0.0892 .
I(0.5 * log(qMat)^2) -0.50368 0.43498 -1.158 0.2490
I(log(qCap) * log(qLab)) 0.56194 0.29120 1.930 0.0558 .
I(log(qCap) * log(qMat)) -0.40996 0.23534 -1.742 0.0839 .
I(log(qLab) * log(qMat)) 0.65793 0.42750 1.539 0.1262
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
Residual standard error: 0.6412 on 130 degrees of freedom
Multiple R-squared: 0.6296, Adjusted R-squared: 0.6039
F-statistic: 24.55 on 9 and 130 DF, p-value: < 2.2e-16
Cobb-Douglas Specification vs Translog Specification
This is really similar to the comparison between Linear Specification and Quadratic Specification. In this case the models are nested too and the tests are:
waldtest(prodCD, prodTL)
Wald test
Model 1: log(qOut) ~ log(qCap) + log(qLab) + log(qMat)
Model 2: log(qOut) ~ log(qCap) + log(qLab) + log(qMat) + I(0.5 * log(qCap)^2) +
I(0.5 * log(qLab)^2) + I(0.5 * log(qMat)^2) + I(log(qCap) *
log(qLab)) + I(log(qCap) * log(qMat)) + I(log(qLab) * log(qMat))
Res.Df Df F Pr(>F)
1 136
2 130 6 2.062 0.06202 .
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
lrtest(prodCD, prodTL)
Likelihood ratio test
Model 1: log(qOut) ~ log(qCap) + log(qLab) + log(qMat)
Model 2: log(qOut) ~ log(qCap) + log(qLab) + log(qMat) + I(0.5 * log(qCap)^2) +
I(0.5 * log(qLab)^2) + I(0.5 * log(qMat)^2) + I(log(qCap) *
log(qLab)) + I(log(qCap) * log(qMat)) + I(log(qLab) * log(qMat))
#Df LogLik Df Chisq Pr(>Chisq)
1 5 -137.61
2 11 -131.25 6 12.727 0.04757 *
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
anova(prodCD, prodTL, test = "F")
Analysis of Variance Table
Model 1: log(qOut) ~ log(qCap) + log(qLab) + log(qMat)
Model 2: log(qOut) ~ log(qCap) + log(qLab) + log(qMat) + I(0.5 * log(qCap)^2) +
I(0.5 * log(qLab)^2) + I(0.5 * log(qMat)^2) + I(log(qCap) *
log(qLab)) + I(log(qCap) * log(qMat)) + I(log(qLab) * log(qMat))
Res.Df RSS Df Sum of Sq F Pr(>F)
1 136 58.534
2 130 53.447 6 5.0866 2.062 0.06202 .
---
Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
From the results the Translog Specification should be preferred as the tests show that the additional variables do add information.
Quadratic Specification vs Translog Specification
The dependent variable is different (\(y\) versus \(\ln(y)\)) and I also cannot compare \(R^2\) or use tests for nested models.
What I can do is to calculate the hypothetical value of \(y\) by doing a logarithmic transformation to the Quadratic Specification and then I'll obtain a comparable \(R^2\):
summary(prodTL)$r.squared; rSquared(log(data$qOut), log(data$qOut) - log(data$qOutQuad))
[1] 0.6295696
[,1]
[1,] 0.5481309
\(\Longrightarrow\) the Translog Specification has a better fit on \(\ln(y)\).
Another option is to apply an exponential transformation to the Translog Specification and then I'll obtain a comparable \(R^2\):
summary(prodQuad)$r.squared; rSquared(data$qOut, data$qOut - exp(data$qOutTL))
[1] 0.8448983
[,1]
[1,] 0.7696638
\(\Longrightarrow\) the Quadratic Specification has a better fit on \(y\).
This table resumes this part of the analysis:
| Quadratic | Translog | |
|---|---|---|
| \(R^2\) on \(y\) | 0.85 | 0.77 |
| \(R^2\) on \(ln(y)\) | 0.55 | 0.63 |
Here I can compare \(R^2\) provided that the number of coefficients is the same. If the models had a different number of coefficients I should use \(\bar{R}^2\).
In any case, comparing \(R^2\) does not help to choose an Specification. An alternative is to verify the theoretical consistency of both Specifications.
Microeconomic Concepts
In this part I'll use the Quadratic and Translog specifications given that those are the best fit models in the last exercises.
Plot of output versus predicted output after adjusting the scale:
data$qOutTL = exp(fitted(prodTL)) par(mfrow=c(1,2)) compPlot(data$qOut, data$qOutQuad, log = "xy", main = "Quadratic Specification") compPlot(data$qOut, data$qOutTL, log = "xy", main = "Translog Specification")
Provided that I have some negative coefficients both in Quadratic and Translog Specifications, there can be a negative predicted output:
sum(data$qOutQuad < 0); sum(data$qOutTL < 0) [1] 0 [1] 0
That problem did appear here.
Another problem that can appear from negative coefficients is a negative marginal effect after an increase in the inputs. Logically, an increase in the inputs should never decrease the output.
To check this I need the marginal productivity:
And the Product-Factor Elasticity:
Another useful concept is Scale Elasticity:
In microeconomics, the concept of monotonicity refers to the fact that an increase in the inputs does not decreases the output. Then, an observation that does not violate monotonicity condition is an observation such that any of its calculated marginal productivities can at least be zero.
In the case of a Translog Specification the Product-Factor elasticity can be written as:
Also to keep in mind with the Translog Specification:
So I'll start with the Product-Factor Elasticity for the Translog Specification:
b1 = coef(prodTL)["log(qCap)"]
b2 = coef(prodTL)["log(qLab)"]
b3 = coef(prodTL)["log(qMat)"]
b11 = coef(prodTL)["I(0.5 * log(qCap)^2)"]
b22 = coef(prodTL)["I(0.5 * log(qLab)^2)"]
b33 = coef(prodTL)["I(0.5 * log(qMat)^2)"]
b12 = b21 = coef(prodTL)["I(log(qCap) * log(qLab))"]
b13 = b31 = coef(prodTL)["I(log(qCap) * log(qMat))"]
b23 = b32 = coef(prodTL)["I(log(qLab) * log(qMat))"]
data$eCapTL = with(data, b1 + b11*log(qCap) + b12*log(qLab) + b13*log(qMat))
data$eLabTL = with(data, b2 + b21*log(qCap) + b22*log(qLab) + b23*log(qMat))
data$eMatTL = with(data, b3 + b31*log(qCap) + b32*log(qLab) + b33*log(qMat))
sum(data$eCapTL < 0); sum(data$eLabTL < 0); sum(data$eMatTL < 0)
[1] 32
[1] 14
[1] 8
summary(data$eCapTL); summary(data$eLabTL); summary(data$eMatTL)
Min. 1st Qu. Median Mean 3rd Qu. Max.
-0.46630 0.03239 0.17720 0.15760 0.31440 0.72970
Min. 1st Qu. Median Mean 3rd Qu. Max.
-1.0260 0.3283 0.6079 0.6550 1.0100 1.9640
Min. 1st Qu. Median Mean 3rd Qu. Max.
-0.3775 0.3608 0.6783 0.6379 0.8727 1.9020
par(mfrow=c(1,3)); hist(data$eCapTL, breaks=20); hist(data$eLabTL, breaks=20); hist(data$eMatTL, breaks=20)
\(\Longrightarrow\) The median effect of an increase of 1% in an input has a positive median effect in the product (e.g. an increase of 1% in labour units increases the output in 0.6%), but the red flag here is that there are negative elasticities being them a sign of model misspecification.
And then I obtain the Marginal Productivity for the Translog Specification:
data$mpCapTL = with(data, eCapTL * qOutTL / qCap) data$mpLabTL = with(data, eLabTL * qOutTL / qLab) data$mpMatTL = with(data, eMatTL * qOutTL / qMat) sum(data$mpCapTL < 0); sum(data$mpLabTL < 0); sum(data$mpMatTL < 0) [1] 32 [1] 14 [1] 8 summary(data$mpCapTL); summary(data$mpLabTL); summary(data$mpMatTL) Min. 1st Qu. Median Mean 3rd Qu. Max. -13.680 0.534 3.766 4.566 7.369 26.840 Min. 1st Qu. Median Mean 3rd Qu. Max. -2.570 2.277 5.337 6.857 10.520 26.830 Min. 1st Qu. Median Mean 3rd Qu. Max. -28.44 28.55 51.83 48.12 70.97 122.90 par(mfrow=c(1,3)); hist(data$mpCapTL, breaks=20); hist(data$mpLabTL, breaks=20); hist(data$mpMatTL, breaks=20)
\(\Longrightarrow\) The effect of increasing the input in one unit has a positive median effect in the product (e.g. an increase of 1 labour unit increases the output in 5.3 units), but the red flag here is that there are negative marginal productivities being them another sign of model misspecification.
With the marginal productivity I can determine the number of observations that violate the monotonicity condition:
data$monoTL = with(data, mpCapTL >= 0 & mpLabTL >= 0 & mpMatTL >= 0 ) sum(!data$monoTL) [1] 48
Now I compute the Scale Elasticity for the Translog Specification:
data$eScaleTL = data$eCapTL + data$eLabTL + data$eMatTL sum(data$eScaleTL < 0) [1] 0 summary(data$eScaleTL) Min. 1st Qu. Median Mean 3rd Qu. Max. 1.163 1.373 1.440 1.451 1.538 1.738 hist(data$eScaleTL, breaks=20)
\(\Longrightarrow\) at least the Scale Elasticity is always positive, but there are negative Product-Factor Elasticities behind this result.
In the case of a Quadratic Specification the Marginal Productivity can be written as:
And from that I can obtain the Product-Factor Elasticity:
Now I compute the Marginal Productivity for the Quadratic Specification:
b1 = coef(prodQuad)["qCap"]
b2 = coef(prodQuad)["qLab"]
b3 = coef(prodQuad)["qMat"]
b11 = coef(prodQuad)["I(0.5 * qCap^2)"]
b22 = coef(prodQuad)["I(0.5 * qLab^2)"]
b33 = coef(prodQuad)["I(0.5 * qMat^2)"]
b12 = b21 = coef(prodQuad)["I(qCap * qLab)"]
b13 = b31 = coef(prodQuad)["I(qCap * qMat)"]
b23 = b32 = coef(prodQuad)["I(qLab * qMat)"]
data$mpCapQuad = with(data, b1 + b11*qCap + b12*qLab + b13*qMat)
data$mpLabQuad = with(data, b2 + b21*qCap + b22*qLab + b23*qMat)
data$mpMatQuad = with(data, b3 + b31*qCap + b32*qLab + b33*qMat)
sum(data$mpCapQuad < 0); sum(data$mpLabQuad < 0); sum(data$mpMatQuad < 0)
[1] 28
[1] 5
[1] 8
summary(data$mpCapQuad); summary(data$mpLabQuad); summary(data$mpMatQuad)
Min. 1st Qu. Median Mean 3rd Qu. Max.
-22.3400 0.7743 2.1520 1.7260 4.0270 16.6900
Min. 1st Qu. Median Mean 3rd Qu. Max.
-1.599 4.224 6.113 7.031 9.513 30.780
Min. 1st Qu. Median Mean 3rd Qu. Max.
-35.57 31.20 47.08 51.57 63.59 260.60
par(mfrow=c(1,3)); hist(data$mpCapQuad, breaks=20); hist(data$mpLabQuad, breaks=20); hist(data$mpMatQuad, breaks=20)
\(\Longrightarrow\) The effect of increasing the input in one unit has a positive median effect in the product (e.g. an increase of 1 labour unit increases the output in 6.1 units), but the red flag here is that there are negative marginal productivities being them another sign of model misspecification.
With the marginal productivity I can determine the number of observations that violate the monotonicity condition:
data$monoQuad = with(data, mpCapQuad >= 0 & mpLabQuad >= 0 & mpMatQuad >= 0 ) sum(!data$monoQuad) [1] 39
And the Product-Factor Elasticity for the Quadratic Espcification:
data$eCapQuad = with(data, mpCapQuad * qCap / qOutQuad)
data$eLabQuad = with(data, mpLabQuad * qLab / qOutQuad)
data$eMatQuad = with(data, mpMatQuad * qMat / qOutQuad)
sum(data$eCapQuad < 0); sum(data$eLabQuad < 0); sum(data$eMatQuad < 0)
[1] 28
[1] 5
[1] 8
summary(data$eCapQuad); summary(data$eLabQuad); summary(data$eMatQuad)
Min. 1st Qu. Median Mean 3rd Qu. Max.
-0.34470 0.01521 0.07704 0.14240 0.21650 0.94330
Min. 1st Qu. Median Mean 3rd Qu. Max.
-0.3157 0.4492 0.6686 0.6835 0.8694 2.3560
Min. 1st Qu. Median Mean 3rd Qu. Max.
-1.4310 0.3797 0.5288 0.4843 0.6135 1.5110
par(mfrow=c(1,3)); hist(data$eCapQuad, breaks=20); hist(data$eLabQuad, breaks=20); hist(data$eMatQuad, breaks=20)
\(\Longrightarrow\) The median effect of an increase of 1% in an input has a positive median effect in the product (e.g. an increase of 1% in labour units increases the output in 0.67%), but the red flag here is that there are negative elasticities being them a sign of model misspecification.
Finally I compute the Scale Elasticity for the Quadratic Espcification:
data$eScaleQuad = data$eCapQuad + data$eCapTL + data$eCapTL sum(data$eScaleQuad < 0) [1] 22 summary(data$eScaleQuad) Min. 1st Qu. Median Mean 3rd Qu. Max. -0.7436 0.1755 0.5162 0.4576 0.7239 1.4550 hist(data$eScaleQuad, breaks=20)
\(\Longrightarrow\) I should prefer the Translog Specification provided there are negative elasticities in this part.
Comparing both specifications:
| Quadratic | Translog | |
|---|---|---|
| \(R^2\) on \(y\) | 0.85 | 0.77 |
| \(R^2\) on \(ln(y)\) | 0.55 | 0.63 |
| Obs. with negative predicted output | 0 | 0 |
| Obs. that violate the monotonicity condition | 39 | 48 |
| Obs. with negative scale elasticity | 22 | 0 |
\(\Longrightarrow\) Translog Specification is not perfect but better than Quadratic Specification in this case. At leasts it has no negative scale elasticity. Both specifications violate the monotonicity condition for more than a 25% of the total observations, and this suggest both models are misspecified.
To seek for an accurate instrument to model the production I should go for a non-parametric regression. By doing that I do not depend on a functional form and can I work on a marginal effects basis that can solve the problem with negative effects of inputs increasing.
R-bloggers.com offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.