Pan-sharpening Using R

In my previous post I described how to perform pan-sharpening using OrfeoToolbox and QGIS. This time I will show you how to do this in R. At the bottom you will find several functions I wrote on top of the ‘raster’ package that allow a convenient pan-sharpening in R.

Motivation

You may wonder why I even bothered myself with pan-sharpening in R when I already have a nice model for pan-sharpening in QGIS. See, one can’t control the data-type of the imagery returned by pan-sharpening that involves OTB. This leads to some unpleasant consequences: during pan-sharpening one will get floating point pixel values even if in initial values were integers. So for example a 600 MiB multi-spectral imagery (with integer pixel values) after pan-sharpening will grow to 5.2 GB. But if we will change datatype of the resulting imagery to force it store only integers it size will be reduced from 5.2 to 2.8 GB which is a huge difference. ‘raster’ package in R allows to control output datatype. Plus using R you can play with different filtering options to play with.

The Theory

In OTB pan-sharpening is performed using following well-known formula:

Where i and j are pixels indices, PAN is the panchromatic image, XS is the multi-spectral image and PAN_smooth is the panchromatic image smoothed with a kernel to fit the multi-spectral image scale.

We will implement exact the same approach using ‘raster’ package for R.

Code Usage and Result

As pan-sharpening is the type of procedure that will reoccur over some time I decided to write generic functions for pan-sharpening itself and for saving the results to have easier time in future.

The usage is as simple as:

pan <- raster(‘pan.tif’)
multi <- brick(‘multi.tif’)
pansharp <- processingPansharp(pan, multi)
output_path <- ‘path_and_filename_without_extention’
saveResult(pansharp, output_path)

Here you are the example results from the script and from the OTB model for one of the illegal landfills in Russia:

Initial multi-band raster

Initial panchromatic raster

Result of pan-sharpening using R script

Result of pan-sharpening using OTB

The code

library(raster)


# Create needed functions -------------------------------------------------

pansharpFun <- function(raster){
    '
    This function pansharpens a raster
    ' 
    # @param raster - Raster object with 3 bands (to-be-pansharpened, high-res and low-frequency component of the high-res image)
    # @param band - band numver, integer
    # @return pansharpened_raster - pansharpened Raster object
    # pansharp = Lowres * Highres / LPF[Highres]
    
    pansharpened_raster <- (raster[,1] * raster[,2]) / raster[,3]
}

extractLPF <- function(pan, multi, filter = 'auto', fun = mean) {
    '
    Returns a low-frequency component of the high-resolution raster by the
        filter adjusted to the low-resolution raster
    '
    # @param pan - a high-resolution panchromatic raster - Raster object
    # @param multi - low-resolution raster to be pansharpened - Raster object
    # @param filter - a smoothing wondow - matrix
    # @param fun - a function to process filter (part of the focal() function)
    # @return LPF - a low-frequency component of the high-resolution raster - Raster object
    
    # Adjust filter size 
    if (filter == 'auto') {
        pan_res <- res(pan) # (x, y) resolution of the panchromatic raster in CRS units (?)
        multi_res <- res(multi) # (x, y) resolution of the lowres raster in CRS units (?)
        x_res_ratio <- round(multi_res[1]/pan_res[1])
        y_res_ratio <- round(multi_res[2]/pan_res[2])
        total <- x_res_ratio + y_res_ratio
        filter <- matrix(1, nc = x_res_ratio, nr = y_res_ratio)
        
        # Enshure that the matrix has an uneven number of colums and rows (needed by focal())
        if (nrow(filter)%%2 == 0) {
            filter <- rbind(filter, 0)
        } 
        if (ncol(filter)%%2 == 0) {
            filter <- cbind(filter, 0)
        }
        
    LPF <- focal(pan, w = filter, fun = fun) # low-frequency component
    
}  


processingPansharp <- function(pan, multi, filter = 'auto', fun = mean){
    ' 
    Pansharpening routine
    '
    # @param pan - a high-resolution panchromatic raster - Raster object
    # @param multi - low-resolution raster to be pansharpened - Raster object
    # @param filter - a smoothing wondow - matrix
    # @param fun - a function to process filter (part of the focal() function)
    # @return pansharp - pansharpened 'multi' raster - Raster object

    # Check if input parameters are valid - we can loose a lot of time if some of the inputs is wrong
      
    LPF <- extractLPF(pan, multi, filter, fun)
        
    multi <- resample(multi, pan) # resample low-resolution image to match high-res one
        
    all <- stack(multi, pan, LPF)
    
    bands <- nbands(multi)
    pan_band <- bands + 1
    lpf_band <- bands + 2
    
    # Pansharpen layers from low-resolution raster one by one
    pansharp_bands <- list()
    for (band in 1:bands) {
        subset <- all[[c(band, pan_band, lpf_band)]]
        raster <- calc(subset, pansharpFun)
        pansharp_bands[[band]] <- raster
    }
    
    pansharp <- stack(pansharp_bands)
}

saveResult <- function(raster, path, format = 'GTiff', datatype = 'INT2S'){
    '
    Saves Raster object to location
    '
    # @param raster - raster to be saved - Raser object
    # @param path - path including filename without extention - string
    # @param format - format of the output raster accordingly to writeRaster() function - string
    # @param datatype - datatype of the raster accordingly to writeRaster() - string
    
    writeRaster(raster, 
                path, 
                format = format, 
                datatype = datatype, 
                overwrite = T)
}


# Do pansharpening --------------------------------------------------------


pan <- raster('pan.tif')
multi <- brick('multi.tif')
pansharp <- processingPansharp(pan, multi)
output_path <- 'r_pansharp-new' # includes path and filename but not the extention
saveResult(pansharp, output_path)