Here are some (trivial) R tips in the course Stat 511. I’ll update this post till the semester is over.

1. Formatting R Code

I’ve submitted an R package named formatR to CRAN yesterday. This package should be easier than the code below, because there is a GUI to tidy your R code. Install with install.packages('formatR').

Reading code is pain, but the well-formatted code might alleviate the pain a little bit. The function tidy.source() in the animation package can help us format our R code automatically. By default it will read your code in the clipboard, parse it and return the well-formatted code. You have options to keep or remove the comments/blank lines and set the width of the code, etc. Spaces and indent will be added automatically. This can save us time typing spaces and paying attention to indent.

## install.packages('animation') if it is not installed yet
library(animation)
## copy some R code somewhere and type:
tidy.source()
## or specify the path of your code file
tidy.source(file.path(system.file(package = "graphics"), "demo", "image.R"))
## can also use a URL
tidy.source('http://www.public.iastate.edu/~dnett/S511/twofactor.R')
## remove blank lines
tidy.source('http://www.public.iastate.edu/~dnett/S511/twofactor.R',
           keep.blank.line = FALSE)
## remove comments
tidy.source('http://www.public.iastate.edu/~dnett/S511/twofactor.R',
           keep.comment = FALSE)

2. Approximating Rationals by Fractions

   We often deal with matrices like in 511 and may wonder what on earth they are. If we directly compute solve(t(X)%*%X)%*%t(X) (or generalized inverse ginv() in MASS) we often end up with seeing a lot of decimals, which makes it difficult to see what these numbers really mean. The function fractions() in the MASS package can approximate rationals by fractions. For example:

   ## from the movie rating example
   X = matrix(c(1, 1, 0, 0, 0, 1, 0, 0, 1, 1, 0, 0, 0,
       0, 1, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1,
       1, 0, 0, 1, 0, 0, 0, 1, 1, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0,
       0, 1, 0, 1, 0), byrow = T, nrow = 7)
   XX = t(X) %*% X
   library(MASS)
   XXgi = ginv(XX)
   C = matrix(c(1, 1, 0, 0, 0, 1, 0, 0, 1, 1, 0, 0, 0,
       0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 0,
       1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 1, 0, 0,
       1, 0, 1, 0, 0, 1, 0, 0, 1, 0, 0, 1, 0, 1, 0, 0, 1, 0, 0,
       0, 1, 1, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 1,
       0, 0, 0, 1, 0, 0, 1), byrow = T, nrow = 12)
   ## what does C(X'X)^{-}X' mean?
   #   hard to see
   C %*% XXgi %*% t(X)
   #               [,1]          [,2]          [,3]          [,4]
   # [1,]  7.500000e-01  2.500000e-01  2.220446e-16  5.551115e-17
   # [2,]  2.500000e-01  7.500000e-01  1.387779e-16  5.551115e-17
   # [3,]  2.500000e-01  7.500000e-01 -1.000000e+00  1.000000e+00
   # [4,]  5.000000e-01 -5.000000e-01  1.000000e+00  0.000000e+00
   # [5,] -1.665335e-16 -5.551115e-17  1.000000e+00 -2.220446e-16
   # [6,]  3.330669e-16  1.110223e-16  1.110223e-16  1.000000e+00
   # [7,]  5.000000e-01 -5.000000e-01  1.000000e+00 -1.000000e+00
   # [8,] -5.551115e-16 -3.330669e-16  1.000000e+00 -1.000000e+00
   # [9,] -5.551115e-17 -2.220446e-16 -1.665335e-16  1.110223e-16
   #[10,]  2.500000e-01 -2.500000e-01 -1.110223e-16  3.053113e-16
   #[11,] -2.500000e-01  2.500000e-01 -2.220446e-16  2.775558e-16
   #[12,] -2.500000e-01  2.500000e-01 -1.000000e+00  1.000000e+00
   #               [,5]          [,6]          [,7]
   # [1,]  2.775558e-17  2.500000e-01 -2.500000e-01
   # [2,] -1.665335e-16 -2.500000e-01  2.500000e-01
   # [3,] -4.440892e-16 -2.500000e-01  2.500000e-01
   # [4,]  4.440892e-16  5.000000e-01 -5.000000e-01
   # [5,]  2.220446e-16  0.000000e+00  1.110223e-16
   # [6,]  1.110223e-16  0.000000e+00 -2.220446e-16
   # [7,]  1.000000e+00  5.000000e-01 -5.000000e-01
   # [8,]  1.000000e+00  2.220446e-16  4.440892e-16
   # [9,]  1.000000e+00  2.775558e-16  1.110223e-16
   #[10,] -5.551115e-17  7.500000e-01  2.500000e-01
   #[11,] -2.220446e-16  2.500000e-01  7.500000e-01
   #[12,] -6.661338e-16  2.500000e-01  7.500000e-01
   
   #   much easier using fractions
   fractions(C %*% XXgi %*% t(X))
   #      [,1] [,2] [,3] [,4] [,5] [,6] [,7]
   # [1,]  3/4  1/4    0    0    0  1/4 -1/4
   # [2,]  1/4  3/4    0    0    0 -1/4  1/4
   # [3,]  1/4  3/4   -1    1    0 -1/4  1/4
   # [4,]  1/2 -1/2    1    0    0  1/2 -1/2
   # [5,]    0    0    1    0    0    0    0
   # [6,]    0    0    0    1    0    0    0
   # [7,]  1/2 -1/2    1   -1    1  1/2 -1/2
   # [8,]    0    0    1   -1    1    0    0
   # [9,]    0    0    0    0    1    0    0
   #[10,]  1/4 -1/4    0    0    0  3/4  1/4
   #[11,] -1/4  1/4    0    0    0  1/4  3/4
   #[12,] -1/4  1/4   -1    1    0  1/4  3/4
   

3. Jittered Strip Chart

Strip chart is a common tool for batch comparisons. When points get overlapped in the plot, we may “jitter” the points by adding a little noise to the data. The R function jitter() is an option to manipulate the data, but stripchart() already supports jittered points.

## some people do not realize that the 'colClasses' argument in
#      read.table() is quite useful -- can avoid explicit conversion
d = read.table("http://dnett.public.iastate.edu/S511/SeedlingDryWeight2.txt",
    header = TRUE, colClasses = c("factor", "factor", "factor",
        "numeric"))
## R base graphics: method = 'jitter' will do
stripchart(SeedlingWeight ~ Tray, data = d, method = "jitter",
    pch = 20, panel.first = grid())
## or the ggplot2 version: geom = 'jitter'
library(ggplot2)
qplot(Tray, SeedlingWeight, data = d, colour = Genotype, geom = "jitter")



Jittered Strip Chart by stripchart()



Jittered Strip Chart by ggplot2

4. Testing in a Linear Model

R base does not provide a general test for the coefficients of a linear model, but we can use the function glh.test() in the gmodels package to do it. If you take a look at its source code, you will find unsurprisingly it is nothing but the code in page 7 of slide set 9 of Dr Nettleton’s lecture notes.

library(gmodels)
time = factor(rep(c(3, 6), each = 5))
temp = factor(rep(c(20, 30, 20, 30), c(2, 3, 4, 1)))
y = c(2, 5, 9, 12, 15, 6, 6, 7, 7, 16)
d = data.frame(time, temp, y)
o = lm(y ~ time + temp + time:temp, data = d)

## compare with page 7-11 in slide set 9

Ctime = matrix(c(0, 1, 0, 0.5), nrow = 1, byrow = T)
glh.test(o, Ctime)

#           Test of General Linear Hypothesis
#  Call:
#  glh.test(reg = o, cm = Ctime)
#  F = 6.0051, df1 = 1, df2 = 6, p-value = 0.04975 

Ctemp = matrix(c(0, 0, 1, 0.5), nrow = 1, byrow = T)
glh.test(o, Ctemp)

#           Test of General Linear Hypothesis
#  Call:
#  glh.test(reg = o, cm = Ctemp)
#  F = 39.7072, df1 = 1, df2 = 6, p-value = 0.0007447 

Ctimetempint = matrix(c(0, 0, 0, 1), nrow = 1, byrow = T)
glh.test(o, Ctimetempint)

#           Test of General Linear Hypothesis
#  Call:
#  glh.test(reg = o, cm = Ctimetempint)
#  F = 0.1226, df1 = 1, df2 = 6, p-value = 0.7382 

Coverall = matrix(c(0, 1, 0, 0, 0, 0, 1, 0, 0, 0,
 0, 1), nrow = 3, byrow = T)
glh.test(o, Coverall) 

#           Test of General Linear Hypothesis
#  Call:
#  glh.test(reg = o, cm = Coverall)
#  F = 13.5319, df1 = 3, df2 = 6, p-value = 0.004439

5. Demo for the F Distribution

I created a dynamic demo to illustrate the power of the F test here: Demonstrating the Power of F Test with gWidgets. Play with it and have fun!

6. Tricks in read.table()

Many people do not realize the possibility of converting the data types of columns in read.table() and always use such specific post hoc conversion:

soup = read.table("http://www.public.iastate.edu/~dnett/S511/soup.txt",
    TRUE)
soup$taster = factor(soup$taster)
soup$batch = factor(soup$batch)
soup$recipe = factor(soup$recipe)
soup$tasteorder = factor(soup$tasteorder)

But in fact, we can specify the types of columns while reading data:

## we know the first 4 are factors and the last one is numeric:
soup = read.table("http://www.public.iastate.edu/~dnett/S511/soup.txt",
    TRUE, colClasses = c(rep("factor", 4), "numeric"))
## conversion already done!
> str(soup)
'data.frame':   72 obs. of  5 variables:
 $ recipe    : Factor w/ 4 levels "1","2","3","4": 1 1 1 1 1 1 2 2 2 2 ...
 $ batch     : Factor w/ 12 levels "1","10","11",..: 1 1 1 1 1 1 5 5 5 5 ...
 $ taster    : Factor w/ 24 levels "1","10","11",..: 1 12 18 19 20 21 1 12 18 19 ...
 $ tasteorder: Factor w/ 3 levels "1","2","3": 1 1 2 2 3 3 2 3 1 3 ...
 $ y         : num  3 5 6 4 4 3 6 9 6 7 ...

There are other tips in read.table() but I find this one the most useful. Check the 22 arguments in ?read.table if you want to know more magic (e.g. how to specify the first column in the data file as the row names).

7. Demo for Newton’s Method

There is a function newton.method() in the package animation which shows the detailed iterations in Newton’s method. Here is a demo:

library(animation)
par(pch = 20)
ani.options(nmax = 50)
newton.method(function(x) 5 * x^3 - 7 * x^2 - 40 *
    x + 100, 7.15, c(-6.2, 7.1))



Newton-Raphson Method for Root-finding

I hope this is useful for understanding iterative algorithms.

8. Misc Tips

   Some little tips:

   1. unname(): to remove the names of objects

   > x = c(a = 1, b = 2)
   > x
   a b
   1 2
   > unname(x)  ## x = unname(x) if one wants to replace x
   [1] 1 2
   

Related Posts

• formatR: farewell to ugly R code
• Demonstrating the Power of F Test with gWidgets
• Enhanced tidy.source() (Preserve Some Comments)
• How to Import MS Excel Data into R
• “Eyeball Test” to Identify An Unfair Coin (or A False Record)